|
|
Publications |
- G. Zhang and
J. Cho, “Tailoring of Nano- and Microstructure
in Biomimetically Synthesized Ceramic Films,”
in press, Proceedings of the 25th Army Science
Conference (Orlando, FL, 2006).
|
|
- G. Zhang, D.
A. Blom, D. W. Coffey, L. F. Allard and J.
Cho, “Synthesis and Processing of Nanostructuerd
Ceramic Thin Films Grown on Self-Assembled
Organic Molecules,” in press, Proceedings
of 9th International Ceramic Processing Science
Symposium,
Wiley, 2006.
|
|
- G. Zhang, D.
A. Blom, D. W. Coffey, L. F. Allard and
J. Cho, “Nanostructured Ceramic Films Formation
on Self-Assembled Monolayers via a Biomimetic
Approach,” Paper No. 0901-Ra21-06 in
Assembly at the Nanoscale -- Toward Functional
Nanostructured Materials (MRS
Proceedings, Vol. 910E), Warrendale,
PA, 2006.
|
|
- S. Walwadkar
and J. Cho, “Evaluation of Die Stress in MEMS
Packaging: Experimental and Theoretical Approaches,” IEEE
Transactions on Components and Packaging Technologies,
29 [4] 735-42 (2006).
|
|
- G. Zhang, J.
Y. Howe, D. W. Coffey, D. A. Blom, L. F. Allard,
and J. Cho, “A Biomimetic Approach to the Deposition
of ZrO2 Films on Self-Assembled Nanoscale Templates,” Materials
Sci. and Eng. C 26
[8], 1344-50 (2006).
|
|
- H. Lee and
J. Cho, “Development of Conformal PDMS and
Parylene Coatings for Microelectronics and
MEMS Packaging,” Paper No. IMECE2005-82955in Proceedings
of IMECE (ASME
International Mechanical Engineering Congress
and Exposition, Washington, D.C., 2005), New
York, NY, 2005.
|
|
- F. Helvaci
and J. Cho,
“A Nanoindentation Study of Thermally-Grown Oxide Films on Silicon”;
pp.375-80 in
Fundamentals of Nanoindentation and Nanotribology
III (MRS
Proceedings, Vol. 841), Warrendale, PA, 2005.
|
|
- Q. Yang, G.
Zhang, K. Chitre, and J. Cho, “Mechanical Behavior
of Ceramic/SAM Bilayer Coatings”; pp. 333-38
in Mechanical Properties of Bioinspired
and Biological Materials (MRS
Proceedings, Vol. 844), Warrendale, PA, 2005.
|
|
- T. O. Salami,
Q. Yang, K. Chitre, S. Zarembo, J. Cho and
S. R. J. Oliver, “Toward a Better Understanding
of Synthesis and Processing of Ceramic/SAM
Bilayer Coatings,” J. Electro. Mater., 34
[5], 534-540 (2005).
|
|
- K. Chitre,
Q. Yang, T. O. Salami, S. R. Oliver, and J.
Cho, "Microstructure and Mechanical Properties
of Ceramic/SAM Bilayer Coatings," J.
Electro. Mater.,
34 [5], 528-533 (2005).
|
|
- J. Cho, S.
G. Terry, R. LeSar and C. G. Levi, “A Kinetic
Monte Carlo Simulation of Thin Film Growth
by Physical Vapor Deposition on Rotating Substrates,” Materials
Sci. and Eng. A,
391, 390-401 (2005).
|
|
- Q. Yang, T.
O. Salami, K. Chitre, S. R. Oliver, and J.
Cho, “Characterization of Strain-Tolerant Ceramic/SAM
Bilayer Coatings”; pp.105-10 in Mechanical
Properties of Nanostructured Materials and
Nanocomposites (MRS
Proceedings, Vol. 791), Warrendale, PA, 2004.
|
|
- M. I. Francis,
K. Wadach, S. Walwadkar and J. Cho, “Interface
Adhesion and Reliability of Microsystem Packaging,”
pp. 285-90 in Micro- and Nanosystems (MRS
Proceedings, Vol. 782), Warrendale, PA, 2004.
|
|
- S. Walwadkar,
P.W. Farrell, Lawrence E. Felton, and J. Cho,
“Effect of Die-Attach Adhesives on the Stress
Evolution in MEMS Packaging”; pp. 847-52 in IMAPS2003
Proceedings, 36th International Symposium on
Microelectronics (November,
2003, Boston, MA), International Microelectronics
and Packaging Society, Washington, DC, 2003.
|
|
- J. Cho, C.
M. Wang, H. M. Chan, J. M. Rickman, and M.
P. Harmer, "A Study of Grain-Boundary
Structure in Rare-Earth Doped Alumina Using
an EBSD Technique," Journal of Materials
Science,
37 [1] 59-64 (2002).
|
|
- C. M. Wang,
J. Cho, H. M. Chan, M. P. Harmer, and J. M.
Rickman, “Influence of Dopant Concentration
on Creep Properties of Nd2O3-Doped Alumina,” Journal
of the American Ceramic Society,
84 [5] 1010-16 (2001).
|
|
- J. Cho, C.
M. Wang, H. M. Chan, J. M. Rickman, and M.
P. Harmer, "Improved Tensile Creep Properties
of Yttrium- and Lanthanum-Doped Alumina: A
Solid Solution Effect," Journal of
Materials Research,
16 [2] 425-29 (2001).
|
|
|
.jpg)
